Both models live inside the same Higgsfield subscription, but they are not priced anywhere near each other. Veo 3.1 at 720p runs about 40 credits for a 4-second clip, or 10 credits per second. Kling 3.0 at 720p runs about 7 credits for 5 seconds, or 1.4 credits per second. Same interface, same credit balance, 7.1x the cost.

That single number should decide your default model, not a demo reel.

The Per-Second Math

Higgsfield quotes credits per generation, and generations have different lengths, which is why almost nobody compares these correctly. Normalize to seconds:

ModelCredits per clipClip lengthCredits per second10s of video
Kling 3.0 720p~75s1.414
Kling 3.0 1080p~85s1.616
Wan 3.0 720p8.755s1.7517.5
Wan 3.0 1080p17.55s3.535
Veo 3.1 Fast 720p~164s4.040
Kling 3.0 4K~305s6.060
Veo 3.1 720p~404s10.0100
Seedance 2.0 1080p~605s12.0120
Credits burned per second of video

Resolution costs more than model tier here. Kling at 4K burns 4x its 720p rate. Seedance 2.0 1080p is the most expensive per second, 8.6x Kling's cheapest.

Kling 3.0 720p1.4
Kling 3.0 1080p1.6
Wan 3.0 720p1.75
Wan 3.0 1080p3.5
Veo 3.1 Fast 720p4
Kling 3.0 4K6
Veo 3.1 720p10
Seedance 2.0 1080p12
Data table
ItemValueShare
Kling 3.0 720p1.43.5%
Kling 3.0 1080p1.64.0%
Wan 3.0 720p1.754.3%
Wan 3.0 1080p3.58.7%
Veo 3.1 Fast 720p49.9%
Kling 3.0 4K614.9%
Veo 3.1 720p1024.8%
Seedance 2.0 1080p1229.8%

Ten seconds of Kling 3.0 at 720p costs 14 credits. Ten seconds of Veo 3.1 at 720p costs 100. On the Ultra plan at $0.033 a credit, that is $0.46 against $3.30 for the same ten seconds of runtime.

Now put it against a real allowance. Starter's 270 credits buy 2.7 ten-second Veo 3.1 clips, or 19 ten-second Kling 3.0 clips. Default to Veo on the entry plan and you will run out in an afternoon, then assume Higgsfield is expensive. It isn't. Veo is.

Why the Gap Exists

Veo 3.1 is Google's model and generates native audio with the picture: dialogue, ambience, sync. Kling 3.0 is silent by default; you add sound in post. You are not paying 7x for better pixels, but for a different output format and a different provider's compute.

That distinction matters when you budget a project. A 30-second spot with six silent shots does not need Veo. One where a character speaks on camera probably does. The alternative is a separate lip-sync pass and a separate audio pipeline.

What Each Model Is For

Kling 3.0 is the volume model. 720p at 1.4 credits a second is cheap enough to generate eight variations of the same shot and throw away seven. It handles motion control, image-reference and first/last-frame work, and the 4K tier at 6 credits a second is still cheaper than Veo at 720p.

Veo 3.1 is the finishing model. Use it for the two or three shots in a piece where audio and lip movement have to be right, and use the Fast variant at 4 credits a second when you need Veo's look but not its full quality.

Wan 3.0 sits between them at 1.75 credits a second for 720p, and Wan 3.0 Prime doubles that to 3.5 for faster generation. If Kling's motion is fighting you on a specific shot, Wan is the cheap second opinion.

The Draft-and-Finish Workflow

Here is the workflow the rate card is practically begging for:

  1. Draft every shot on Kling 3.0 at 720p. A 12-shot piece costs 84 credits.
  2. Pick the takes that work. Regenerate the failures; they are still cheap.
  3. Re-render only the shots that need audio or a hero look on Veo 3.1. Three shots at 40 credits is 120.
  4. Total: about 204 credits for a 12-shot piece with three finished hero shots.

Do it the other way, Veo for everything, and the same piece costs 480 credits before you have thrown away a single bad take. That is the difference between Plus lasting a month and Plus lasting ten days.

What It Costs on Each Plan

PlanCost per credit10s Kling 3.0 720p10s Veo 3.1 720p
Starter ($19, 270 credits)$0.070$0.99$7.04
Plus ($47 yearly, 1,200)$0.039$0.55$3.92
Ultra ($99 yearly, 3,000)$0.033$0.46$3.30

The plan you pick changes the dollar cost by about half. The model you pick changes it by 7x. Optimize the model first.